While it’s true that there are many phone stands out there available for purchase, 3D printed versions are often customized for a specific task. This can make them really stand out.
On top of that (and most importantly), it’s fun to make your own! Whether it’s for the custom colors, unique designs, or a specific phone stand model that’s suited to a theme you like, the joy of creation is the reason many makers get into 3D printing. And there is immense satisfaction in printing items that can be used every day. A phone stand is the perfect intersection of creativity and practicality.
Without further ado, here are our top choices for great 3D printable phone stands. And if you see the perfect prop for your phone but don’t have the setup to print it yourself, try a printing service through Craftcloud!
Stationary
Although these phone stands may not be adjustable to your perfect viewing angle, they have their own draw to them. Whether it’s themed to your favorite series or is just plain cool to look at, you can trust these designs to display your device in style!
Troll
Let’s be honest, some phone stands are a little boring to look at! For a change of scenery, here’s an awesome troll phone stand that can spice up the otherwise boring features of your desk. The model includes a few very well-designed and detailed parts that are superglued together.
To really bring the troll to life, you can also add some paint like one of these impressive makes.
- Who designed it? blackmoonmini
- How printable/popular is it? Boasting over 9,500 downloads and several community prints, this fun troll captured the hearts of many.
- Where to find it? MyMiniFactory
Gaming Chair
When you sit down to start gaming, having your phone nearby can be handy to make sure you don’t lose track of time or miss an important call. What could be better than giving your phone its own gaming chair to sit in next to you?
This gaming chair stand has an opening in the bottom to pass a cable through and is an easy print requiring no supports.
- Who designed it? DriftGaming.eu
- How printable/popular is it? Around four makers have shared their phone-scale gaming chairs.
- Where to find it? MyMiniFactory
Foldable
So far, the models have been larger and bulkier stands meant to sit on a desk or table, but this one is meant for taking with you on the go. It prints flat all in one piece, folds up into a stand, and then goes flat again when you’re done.
Being a print-in-place design, this model requires no supports and will work with your standard print settings. Just make sure your bed adhesion is on point for that important first layer!
- Who designed it? ClementCrd
- How printable/popular is it? From over 6,600 downloads, several prints of this portable model have been shared.
- Where to find it? MyMiniFactory
Print-in-Place
This phone holder is special not only because it prints all at once with no assembly, but it automatically holds onto your phone! It can be used in the car with a printable vent attachment or as a stand on a table.
Due to some tighter tolerances in the final product, test prints are included. The designer recommends using a standard 0.2 mm layer height or less, as well as 15-30% infill. It doesn’t need supports and prints all in one piece.
Tensegrity
The popular tensegrity structure has now been turned into a phone stand! Whether you’re looking to bewilder someone at the office or just want something to look cool on your desk at home, this phone stand will accomplish it perfectly.
The designer recommends printing with supports for the upper half of the model since it’s somewhat complicated, and they used 38% infill. The only other hardware needed is some string to tie the models together.
- Who designed it? winfordew
- How printable/popular is it? Four people have shared successful makes of this ingenious design, and there’s two remixes that remove the need for supports.
- Where to find it? Thingiverse
Stormtrooper
For any Star Wars fans out there, here’s a great display piece that’s also functional! Featuring a Stormtrooper holding up your phone and a design theme similar to Star Wars mechanisms, this is a model that will encourage breaking out the paint set to add lots of detail.
The designer recommends a 0.25 mm layer height, and certain pieces will need supports. They also recommend printing with 15% infill but mention that it should be printable hollow.
- Who designed it? ray4510
- How printable/popular is it? There are 43 makes of this fan-favorite design, with 4 remixes.
- Where to find it? Thingiverse
Apple Watch
For those who have both an iPhone and an Apple Watch, this printable stand is the ultimate in convenience. It has an open spot for both a regular lightning cable and the Apple Watch charger to press in. This makes a great bedside stand to dock both your phone and watch at the end of the day to get them powered up for the morning!
This is a relatively simple print, but the model will need supports.
- Who designed it? CyberJack
- How printable/popular is it? Nine makers have shared their combination stands in a range of filaments.
- Where to find it? Thingiverse
Moby
While originally designed for employees of Moby Inc, the creator has since released this model to the public for all to enjoy. This beautiful whale tail has an integrated slot for a cable, meaning it doubles as a charging dock as well as a phone stand.
The designer recommends 10% or more infill, and it prints well in almost any layer height with no supports.
- Who designed it? Moby_Inc
- How printable/popular is it? This aquatic model has an impressive 2,800 likes and is approaching 50 makes on Thingiverse.
- Where to find it? Thingiverse
Walker
Sometimes losing a phone can make you feel like it grew legs and ran. This stand gives your phone some legs for the opposite reason; to make sure it can’t get away! It’s a highly detailed design able to be printed in multiple colors, and it has large feet for stable support. It would make a great gift for anyone interested in mechanical themes or robotics.
The creator recommends using a 0.2 mm layer height with 10% infill, and it does require support. There’s also a blank phone holder section if you’d prefer to lose the Android logo.
- Who designed it? Jacks-Filament
- How printable/popular is it? There have been over 13,000 downloads of this robot-inspired design, and 16 makes have been shared.
- Where to find it? Thingiverse
Adjustable
These phone stands are meant to adapt to the situation. If you’re looking for a stand to hold your device while you work, then you’ve come to the right place.
Print-in-Place Foldable
Have you ever found yourself looking for a phone stand that not only works but is also foldable? This compact phone stand is exactly what you need! Printed in a single piece, the clever design requires no assembly and offers a practical solution for all types of phones. Whether for watching videos, taking photos, or simply keeping your device at hand, this stand is as versatile as it is reliable.
User reviews highlight the ease of printing and effectiveness of the stand, especially in materials like PLA Galaxy (Nebulae). Printing takes approximately 53 minutes to 1.6 hours, yielding a sturdy stand that accommodates different phone sizes. For printing, use a 0.4-mm nozzle and set your layer height to 0.2 mm with 10% infill.
- Who designed it? Mimi home decoration
- How printable/popular is it? There are over 800 downloads and 530 prints. Will yours be next?
- Where to find it? MakerWorld
Vertical or Horizontal
This adjustable phone stand is the ideal solution for those who value practicality. With the ability to be 3D printed without supports, it’s a true champion of convenience. Moreover, its structure can be easily disassembled, making it perfect for those on the go.
Based on user feedback, it’s recommended to print with PLA for a hassle-free experience. To avoid issues with screws, the designer has introduced new versions of the model that incorporate notches in the main interfaces, minimizing the need for excessive tightening. This not only simplifies assembly but also enhances the stand’s durability. Printing recommendations include a 0.2-mm layer height and 15% infill with 3 outer walls.
- Who designed it? rennim
- How printable/popular is it? The over 300 downloads and nearly 300 prints make it clear that many makers are choosing this as their new accessory.
- Where to find it? MakerWorld
Voronoi
This stand allows for customized tilt adjustments, providing a comfortable viewing angle for your device without the need for additional supports or glue.
First, ensure you use PLA or PETG to guarantee durability and stability. Print it without supports, ensuring a clean finish without extra residues. Users recommend adding a brim of approximately 10 mm for secure adhesion and adjusting the distance between the object and the brim to 0.05 mm to prevent failures. Additionally, some adjustments to print speed may be necessary, especially when printing the gear, where reduced speed can ensure superior quality.
- Who designed it? 3D servis
- How printable/popular is it? The nearly 9,000 downloads and over 2,800 prints are evidence that it’s a very popular model.
- Where to find it? MakerWorld, Printables
Tilt
If you like a mechanical and rugged look in a sturdy design, then this model might be just what you’re looking for! With various improvements based on user feedback, it features a charger input at the bottom and smoother gears and guide grooves.
Applying silicone spray to the gear teeth is recommended to ensure smooth and durable movement of the mechanism, though actual clearance depends on many factors, such as flow, filament, and printer condition. Parts labeled with the letter C have more clearance and may need to be glued. Some users reported needing to sand lightly after printing with PLA and a layer height of 0.15 mm. With these simple tips, you’ll have a customized stand ready to use in no time!
- Who designed it? Matthew_Ghost
- How printable/popular is it? With almost 5,000 downloads and 38 beautiful makes, this could be the perfect choice for your table, too.
- Where to find it? Printables
Forklift
Have you ever imagined your phone being lifted by a miniature forklift? With this forklift-shaped phone stand, this fantasy becomes reality! This model not only securely holds your phone but also adds a touch of fun to your environment, making it the perfect gift for your logistics-savvy friend!
Use a 0.4-mm nozzle and set your layer height to 0.2 mm with 20% infill. It’s also recommended to use tree supports to ensure stable printing. With an estimated print time of about 3 hours using a printer like the Bambu Lab X1 Carbon, you can expect high-quality results.
- Who designed it? Sparks3D
- How printable/popular is it? With beautiful photos of shared makes and around 435 downloads, it won’t be difficult to take your phone stand to a new level.
- Where to find it? MakerWorld
Industrial
The industrial phone stand is a great choice for those looking to combine style and practicality in 3D printing. This model keeps your phone elegantly and securely elevated, while also allowing precise adjustments for different device sizes, thanks to the included STEP file. It’s the perfect addition to any environment, whether at home or in the office.
Specific recommendations, such as using M3x12 screws for the feet and M3x25 screws for connecting the swivel arm and phone holder, are crucial for the assembly process. Make sure to prepare the M3 screws and nuts before assembly to avoid unnecessary difficulties. Try printing in metallic PLA for a beautiful result.
- Who designed it? Josh-3D
- How printable/popular is it? More than 3,000 makers have already downloaded it and at least 2,300 people confirmed that they managed to make the stand.
- Where to find it? MakerWorld
Modular
This mounting system not only holds phones, but things like cameras and headphones as well! A collection of different arms, stands, connectors, and adapters make this the ultimate customizable phone holder.
This model set includes printable M5 bolts to use, or they can be replaced with standard metal bolts. The creator highly recommends support for all pieces and printing with a higher infill percentage for strength in the parts.
- Who designed it? HeyVye
- How printable/popular is it? Over 27,300 people have downloaded this fully customizable design, with several prints shared on MyMiniFactory.
- Where to find it? MyMiniFactory
Screw Adjustable
Sometimes, you’ll need to dial in a precise setting for your phone stand to find the perfect position. While this may be tricky with other designs, it’s no problem with this awesome screw-adjustable phone stand.
The designer recommends printing the screw laying on its side with supports and printing the base without supports. Further printing tips were kindly provided by the designer in the model details.
- Who designed it? amarten1
- How printable/popular is it? With over 1,000 likes and 12 makes, many have chosen this model as their stand of choice! There are also seven remixes.
- Where to find it? Thingiverse
Tripod
If you find yourself needing more durability, this tripod stand might be the right choice. With a versatile ball joint, adjustable grip, and foldable legs, it can handle whatever you throw at it. Just make sure your printer is well-calibrated.
While the original design is made for tight 0.1 mm tolerances, there are also files suitable for printers that need larger tolerances. Another advantage of this model is that it does not require any screws for assembly, which makes life a little easier. The designer has provided detailed instructions for assembling the model on Printables.
- Who designed it? DieZopfe
- How printable/popular is it? With over 2,500 downloads and 52 makes, many people have praised this model’s simple design.
- Where to find it? Printables
Compliant
Compliant mechanisms are one of the coolest applications of 3D printers. Thanks to the uniqueness of the 3D printing process, creating compliant mechanisms with a 3D printer is much easier than other manufacturing methods. This awesome phone stand utilizes compliant mechanisms to create a range of tilt angles whilst keeping the design as simple as possible.
Speaking of simplicity, the entire design can be printed in vase mode, which makes it possible to whip a few of these up quickly. Comments expressed some surprise about how sturdy the design turned out to be.
- Who designed it? rorys3D
- How printable/popular is it? This genius phone stand has over 4,300 downloads and an impressive 61 makes.
- Where to find it? Printables
Multi-Angle
This is a keychain phone stand with a rotating inner block, which allows for multiple viewing angles in a compact package. It’s a great print for those on the go, and it’s a simple design, meaning it’s an easy print as well.
Many print settings will work due to the simplicity, but a Cults user posted a make with 0.2-mm layer height and around 30% infill for strength.
- Who designed it? chienline
- How printable/popular is it? This pocket-sized design has over 8,700 downloads, with 6 makes shared on Cults.
- Where to find it? Cults
License: The text of "3D Printed Phone Stand: 20 Models We Love" by All3DP is licensed under a Creative Commons Attribution 4.0 International License.