Anycubic, a renowned brand in consumer 3D printing, has just showcased its latest advancements at TCT Shanghai, the highly anticipated consumer electronics event. The event, hosted at Booth number 8E22, not only features the latest product launches but also includes workshop lectures throughout the exhibition by 3D influencers and enthusiasts at Anycubic’s Geek Bar. This event coincided with Anycubic’s Annual Product Launch Event, which was hosted onsite on May 7th by James Ouyang, the co-founder of Anycubic.

Anycubic Shows Out at TCT Shanghai

Anycubic’s TCT Shanghai booth exuded a sleek and modern aesthetic, primarily adorned in a crisp white surface finish. Accentuating this clean backdrop were four vibrant decorative colors carefully curated from the PANTONE Color Institute. These hues were strategically incorporated into the featured display shelf and its backdrop, both constructed using real PANTONE exclusive filaments.

Additionally, the colors adorned the aisle arch, infusing the entire stand with a lively and dynamic ambiance. This attention to detail put into the booth exemplified Anycubic’s latest innovation, the multi-color FDM Printer, Kobra 3 Combo, which was showcased at the event.

At 10 AM local time, Ouyang took the stage in front of the featured display zone, marking the beginning of the event. With passion and pride, he embarked on a journey through Anycubic’s remarkable achievements in both FDM and resin printing technology. From the pioneering Kossel series in 2015 to the latest multi-color Kobra 3 Combo, which signifies a further expansion of the Kobra series, Anycubic has showcased the evolution from single-color to multi-color printing and a remarkable increase in printing speed from 50mm/s to an impressive 600mm/s. This underscores the Anycubic’s commitment to making optimal 3D printing technology accessible for households.

In the realm of resin printing, Anycubic’s venture into photonic innovation began with the introduction of the wildly popular Anycubic Photon in September 2017. Fast forward to 2020, and the Photon Mono X emerged onto the scene, boasting a 4K monochrome screen and a significantly reduced 5-second per layer printing time. Further enhancing precision and user experience, the Photon M3 Premium and Photon Mono M5s Pro introduced innovative technologies, including LighTurbo 2.0 and smart features, respectively.

Anycubic Shares a Peak into Product Future

Now, the latest pinnacle of this journey is the introduction of the Photon Mono M7 Pro. This latest resin printer showcases Anycubic’s latest upgrades in precision, enhanced ultra-fast speed and a host of new features designed to enhance ease of use.

“We are thrilled to debut our latest innovations at TCT Shanghai 2024,” said Ouyang, co-founder of Anycubic. “With the launch of our annual new products, we’d want our users could unleash their creativity and explore endless possibilities in 3D printing”

Ouyang took the lead in operating and showcasing Anycubic’s latest innovations, the Kobra 3 Combo and Photon Mono M7 Pro, providing firsthand demonstrations of their capabilities to visitors.

Kobra 3 Combo and Photon Mono M7 Pro Mark New Era for Anycubic

Anycubic unveiled a new FDM and resin 3D printing at TCT Shanghai. The Kobra 3 Combo is a powerhouse FDM machine that boasts the capability of printing models in up to 8 colors. The Anycubic Color Engine Pro (ACE Pro) enables simultaneous printing in two linked boxes, accommodating up to eight filament colors at once.

With features like active drying and side-drying functionality, combined with RFID recognition for Anycubic filaments, the Kobra 3 Combo ensures optimal filament conditions for up to 24 hours and seamless printing quality. With a maximum printing speed of 600mm per minute (single-color mode) and support from the Anycubic App and Slicer, the Kobra 3 Combo delivers an unparalleled printing experience.

In the realm of resin 3D printing, which Anycubic is very accustomed to, sits the new Photon Mono M7 Pro. The printer represents a new standard for precision and performance for the Anycubic product line. Using regular resin, the TÜV Rheinland tested Photon Mono M7 Pro reaches a maximum print speed of around 130mm/h with a 0.1mm layer height. This speed increases to 170mm/h when employing high-speed resin.

With a high precision of 14K empowered by upgraded LighTurbo 3.0 and an impressive resolution of 13312×5120 that contributes an XY axis measurement of 16.8×24.8 μm, the Photon Mono M7 Pro promises intricate print quality and accuracy. Equipped with advanced features such as dynamic light output compensation and the Dynamic Temperature Controlling Resin Vat, which adjusts the printing environment from 25-70℃ and can continuously maintain it at 25℃, the most ideal printing temperature, this printer ensures smooth and precise printing results every time.

Moreover, with support from Anycubic’s Makeronline community platform which has and will host themed printing challenges, users can connect, collaborate, and participate in dynamic competitions, fostering creativity and innovation.

Anycubic Also Reveals New Venture into Commercial Offerings

After presenting the Kobra 3 Combo and Photon Mono M7 Pro, Ouyang proceeded to announce the addition of a 3D printing application line to Anycubic’s commercial offerings.

“The Application line signifies our commitment to bringing 3D printing into every household,” said Ouyang.

This new venture is aimed at providing practical and exciting models and accessories to enhance the 3D printing experience for users. With the introduction of models such as the “Light Saber” and “Star Tunnel”, along with accompanying auxiliary kits for household decorations and everyday gadgets, Anycubic aims to elevate the fun and practicality of 3D printing to every household.

Ouyang also announced that there will be an online unboxing livestream event tonight, on May 7, at 21:00 UTC+8. Anycubic will be inviting representatives from PANTONE and TÜV Rheinland and influential figures from the industry to participate in an aesthetic technology discussion. The livestream will feature detailed displays of Anycubic’s latest products, followed by a Q&A session where viewers can engage directly with the hosts. Exciting prizes will also be up for grabs during the event. Be sure to stay tuned for this exclusive opportunity and potentially win some fantastic prizes!

The Livestream Information:

Time: 8 AM UTC-5 or 3 PM CET, May 7th, 2024.

Where to watch:  YouTube, Facebook, TikTok

For more information about Anycubic and its latest 3D printing solutions, visit Anycubic’s website.