Looking to auto-tune the PID settings on your printer to improve print quality? Learn how 3D printer PID tuning works!
3D printing threads and screws that fit is a challenge. Check out this simple guide to learn how to successfully design and print them!
When it comes to printing in PLA, not sticking to the bed is a common issue. Read on for six simple solutions to this problem!
When you're printing a temp tower, Cura has its advantages. Read on to improve your 3D print and save on precious filament!
Sanding 3D prints is a lot of work, but it's worth the effort. Read on to learn how to achieve photo-ready 3D prints!
If your nozzle is partially clogged, the 3D printer cold pull is your first line of defense. Read on to learn how to do it!
Wondering what causes layer shifting in 3D printing? Check out six easy tips and tricks to prevent a 3D print layer shift!
Some designs are too big to 3D print in one piece. So, the parts need to be glued together. Check out glues for PLA, PETG, and ABS!
Bridging is a 3D printing technique that lets makers significantly cut down on print supports. Learn how to improve your printer's bridging!
3D print zits and blobs are a quality issue that affects appearance and function. Read about the causes and how you can prevent them!
Plagued by 3D printer under-extrusion and don't know how to get rid of it? Check out this guide for some simple solutions.
Did you know that you can split an STL file in Cura? Split models easily with this tutorial, which includes two methods. Read on for more!
With Cura, filament change operations and mid-print insertions are easy. Find out how to use the Cura pause at height feature!
If you've got an Elegoo printer and aren't sure where to start, read on! We've got Elegoo resin settings for great results.
Get the best out of your Neptune 4 (Pro) with the right settings. Check out how to set up the perfect Elegoo Neptune 4 (Pro) Cura profile!
Ironing is a useful slicing feature that can smooth out the top layer of 3D prints. Read on to learn all about Cura ironing settings!
Long discussions have been had about whether direct extrusion is actually better. Learn about direct drive vs. Bowden extruders!
PETG is a great material to 3D print with, even if it is a little stringy. Read on for three easy ways to fix PETG stringing!
Elephant's foot is a 3D printing problem that's not often discussed but is often experienced. Learn how to stop it easily!
3D printer Z banding, or Z wobble, is when regularly-spaced bulges form around the sides of a printed part. Learn some tips to prevent it!